1. Firstly, put the egg tray machine flat on the horizontal table, do not tilt.
2. Then turn on the power supply, as well as the temperature of the upper and lower modules of the equipment, and then wait for the temperature to rise
3. After the machine rises, pull up the upper die and grind it
4. Pour the prepared slurry into the mold of the machine, and close the upper and lower molds. After one to two minutes, cones can form.
5. When the upper mold is pulled up and the lower mold is pulled apart, the cone will automatically fall into the lower channel and slide out
6. Repeat the above process repeatedly, clean the upper and lower molds in time, keep them clean, and then unplug the power plug.